The Role of Packaging in Beverage Quality and Shelf Life

Views: 3716 Author: Howie SUN Publish Time: Update Time:
The packer sets the line rating more often than the filler does, because it is rated in cases per hour including film changes and seal cooling.
Key facts at a glance
TypesShrink wrap, wrap-around carton, carton packing, tray
ThroughputMatched to the filler; usually the line bottleneck
Key controlFilm tension, seal temperature, case squareness
Contact materialPE film, corrugated board, tray board
Key decisionShrink, carton or tray
Line positionAfter labelling, before palletizing

Why is the packer usually the line bottleneck?

A filler is rated on bottles per hour at a steady state; a packer is rated on cases per hour including film roll changes, seal cooling and pattern changes. Buyers compare the filler rating and forget that a packer rated below it sets the line rating for the whole shift.

What makes a shrink pack fail in transit?

Film tension and seal temperature. A pack that is tight on the line but loose after cooling has been sealed too cold; a pack with a torn corner has been sealed too hot or cooled too fast. Both show up as returns, not as line stops, which is why they are easy to miss at commissioning.

Pack formatCost per caseWhat it protects
Shrink wrapLowestRetail display, short distribution
Tray + shrinkMiddleStacking and visibility
Wrap-around cartonHigherPrint area and long distribution
Regular slotted cartonHighest board useFragile packs and export

Reference unit for this duty: the Wrap-round Film Shrink Wrapping.

When is a carton packer worth the extra cost?

When the market needs print on the case, when the pack has to stack high in a warehouse, or when the product is sold through distribution rather than direct to retail. A carton costs more per case, and it protects the bottles and carries the brand where shrink film cannot.

Site requirements, air and power consumption sit with the Carton Packing.

How is a packer matched to the filler?

In cases per hour, at the same format, with margin for film changes and seal cooling. A packer rated below the filler sets the line rating, and the shortfall appears as bottles accumulating before the packer rather than as a machine fault.

The same question is worked through from another angle in How to Optimize Palletizers for Efficient Packaging.

How to read the numbers. Where a BPH appears below it is the specification range, not a measured rate. Packers are rated on a steady pack; jams and changeover sit outside that figure. Plan on 0.65-0.85.

Frequently asked questions

Why do bottles fall out of a shrink pack?

Usually insufficient wrap around the base or a seal that opened. Check the film width, the lap position and the seal temperature together, because changing one alone moves the failure elsewhere.

Can a packer run 6-packs and 24-packs?

With different lane guides and a film width change, yes. The changeover is mechanical on a semi-automatic packer, so a plant selling both formats usually accepts a scheduled stop between runs.

Why does the film sag after the tunnel?

Too much heat, too little tension, or a film that is too thin for the pack weight. A pack that sags after cooling was sealed outside its window.

What case pattern should a new line use?

The pattern that fits the pallet footprint and the retail unit. It is decided with the palletizer and the film width at the same time, because changing it later changes three machines.

Key takeaways
  1. The packer sets the line rating more often than the filler does.
  2. Carton buys print and stack strength; shrink buys cost per case.
  3. Tunnel dwell time usually limits the packer, not the wrapper.
  4. Case pattern is decided with the pallet, not after it.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.