Advantages of Volumetric Hotfill Aluminum Can Machines

Views: 1870 Author: Howie SUN Publish Time: Update Time:
A can line is rated in cans per hour because the seamer sets the pace, and the seam, not the filler, is where the rating is usually lost. Volumetric hotfill aluminum can machines are specifically engineered to handle high temperatures during the filling process without compromising the product quality.
Key facts at a glance
Filling methodIsobaric for beer and CSD, volumetric for juice and tea
Output rangeUp to 25,000 CPH
Can rangeStandard 250, 330 and 500 ml
SeamingRoller seamer integrated with the filler
OptionsHot fill for juice and tea, nitrogen dosing
Key controlFill level, seam tightness, dissolved oxygen

Why is can filling measured in CPH and not BPH?

A can line is counted in cans per hour because the container is the unit the seamer closes. CPH and BPH cannot be converted without the fill volume, and the downstream packer is sized in cases per hour. Comparing a 24,000 CPH can line with a 24,000 BPH bottle line compares two different plants.

What does the seamer have to get right?

A can is sealed by two rolling operations that fold the can flange and the end together. Seam thickness, seam height and overlap are checked by tear-down at a fixed interval, not by eye. A seam that looks right and measures wrong leaks three weeks later, in the customer warehouse rather than on your line.

ProductFilling principleCritical measurement
BeerIsobaric, coldDissolved oxygen and seam tightness
CSD and sodaIsobaric, coldCO2 retention and fill height
Juice and teaVolumetric or hot fillFill temperature and seam integrity
Energy drinksIsobaric or volumetricDissolved oxygen and closure

Valve count, utility schedule and footprint sit on the Aluminum Can Filling Machine for Beer, Carbonated Soft Drink page.

What changes between a beer can and a juice can?

Beer and CSD run isobaric, cold, under counter-pressure. Juice and tea often run hot fill or a volumetric fill with a downstream pasteuriser. The can is the same format; the filler, the valve set and the temperature control are not, so one can line rarely covers both without a second specification.

Volumetric hotfill aluminum can machines are specifically engineered to handle high temperatures during the filling process without compromising the product quality.

Where this becomes a line rather than a single machine, the Aluminum Can Filling Machine for Hotfill Juice and Tea is the starting point.

What does a can line cost to run that buyers forget?

Compressed air for the seamer and the air conveyor, CO2 for purging, and the tear-down cans used for seam checks every shift. None of these appear in the machine price. A line running 24,000 CPH can consume a measurable share of its operating cost in air alone.

The same question is worked through from another angle in How Aluminum Can Filling Machines Handle Carbonated Soft Drinks.

How to read the numbers. The BPH figures quoted are reference ranges on the product specification. Can lines lose more to seamer stops and conveyor accumulation than to filler speed. Plan on a factor of 0.65-0.85.

Frequently asked questions

How many cans per minute is 18,000 CPH?

300 cans per minute. Divide CPH by 60. The seamer, the filler and the packer all have to carry that number, so the line rating is the lowest of the three.

Does a can line need nitrogen dosing?

It is common for beer, juice and some CSD, where headspace oxygen has to be pushed down. It is an option with a consumable cost, so it belongs in the utility and consumable schedule, not in the base price.

Can a can line run 330 ml and 500 ml in one shift?

With change parts for the filler, the seamer and the conveyor, yes. The changeover is longer than a label change and is normally scheduled between campaigns.

Does a 250 ml can run faster than a 500 ml can?

Yes, at the same filler, because the fill volume per cycle is smaller. The seamer and the packer still have to carry the higher can rate, which is why the line rating is set on cans per hour, not litres.

Key takeaways
  1. CPH and BPH are different units; never compare them directly.
  2. The seamer, not the filler, is where a can line loses its rating.
  3. Dissolved oxygen in the finished can is the number that decides shelf life.
  4. Smaller cans raise the can rate without raising the litre rate.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.