Repeat Order from Angola: Second Line Ordered

Views: 3148 Author: Howie SUN Publish Time: Update Time:
Two quotations that look different usually differ in four numbers: the slowest station, the changeover time, the CIP time and the consumable cost.

joins hands with Angolan customers again

Project at a glance
DestinationAngola
Rated outputSet by the order
Configurationblow molding, shrink, conveyor
Productfilling equipment
Supply scopeSupply, factory test, shipping, commissioning
RecordOrder and delivery notes below

What was ordered?

Two years ago, Angolan customer Berosil Industrial ordered a bottled water production line from Sunswell, including injection molding, bottle blowing machine, filling machine, conveyor, sleeve labeling machine and film packing machine, as well as related auxiliary equipment.

What was non-standard about the project?

Recently the customer decided to upgrade some of their other product lines. Therefore, they negotiated with Sunswell again about the purchase of new equipment. After in-depth technical and business exchanges, the customer decided to order a set of 5-gallon blow molder, 5L blow molding machine, film shrink wrapper, air compressor and other related auxiliary machines from Sunswell. The new 5-gallon blow molding machine will be used to blow PET 5-gallon bottles with handles that are BPA free and meet consumer health requirements. The 5L automatic blow molding machine will use servo mold clamping, which is more stable and reliable. The 5L bottle blowing machine will be designed for customers' 38-neck 74-gram preforms to meet customers' special requirements. The film wrapping machine ordered will be specially customized for the customer's 5L bottle.

StationFunction in the line
Blow mouldingContainer making
LabellerDecoration
PackingSecondary packaging
ConveyorTransfer between stations

Where this becomes a line rather than a single machine, the Gravity Filling Machine for Still Water is the starting point.

What does the delivery record show?

Sunswell will always be committed to serving old customers well.

The Volumetric Filling Machine for Still Water is the matching unit when this becomes a line project.

Frequently asked questions

What does the order cover?

The order covers supply, factory test, shipping and commissioning, configured with blow molding, shrink, conveyor. The line was specified for filling equipment.

What capacity was specified, and what should the plant plan on?

Set by the order at the format named on the order. Rated figures exclude changeover, CIP and downstream stops, so plan production on 0.65-0.85 of that number.

What was non-standard about the project?

The non-standard items are the ones recorded in the section above. Everything else follows the standard configuration for filling equipment.

How is the line handed over?

Factory acceptance test before shipment, then installation and commissioning on site. Operator training is part of the handover, not an extra.

What is covered after handover?

Spare parts for the wear items, remote support, and a commissioning report that records the settings the line was left running at.

Key takeaways
  1. Angola took delivery of a line rated Set by the order, configured for filling equipment.
  2. Scope ran from factory test to commissioning: supply, factory test, shipping and commissioning.
  3. The non-standard items are listed above rather than left to the order correspondence.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.