You are here: Home » Products » Filling » Glass Bottle Filler for CSD » BXGF Series Glass Bottle Filling Machine for Water
Share to:

BXGF Series Glass Bottle Filling Machine for Water

Application: water

Containers applied for: glass bottle

Filling system: gravity filling

Production capacity: 3,000BPH – 36,000BPH (500ml)

3-in-1 filling monoblock, combined with rinsing, filling and capping. It is innovated and designed in the requirement of still pure water, mineral water, vodka, liquor and wine, on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy. The machine suits both glass and PET bottles with plastic pre-thread cap.

Availability:
Quantity:

Equipment Compositions and Functions

Bottle block cylinder & Infeed Screw

05-01 Glass Bottle Filler for Water620

Bottle block cylinder is used to prevent the bottle go into the filling equipment during normal running and default .It can be operated manually and automatically. If there is not enough bottle supply, the bottle block cylinder controls the starwheel and reduces the running speed as well.

Bottle infeed screw drive is composed by the 2 level reducer, the 1st level is the cone gear drive, for driving the bottle in screw and bottle in chain, the 2nd level is bottle in screw drive box, for adjusting the bottle infeed screw and position adjustment during bottle shape changing .


Rinser

05-01 Glass Bottle Filler for Water1213

Composed by Dispenser, rinsing clamp, rinsing water recycle, there is a fixed rinsing time, the empty bottle was held by a fixed track, rinsing, drying, then reaches the cleaning purpose.


Filler

05-01 Glass Bottle Filler for Water1413

  • Rotary wheel fully made of stainless steel SUS 304.

  • Gravity filling method.

  • Filling valves are made of SUS304L.

  • Filling valves are reasonably structured with accurate filling.

  • Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.

  • Level of cylinder is controlled with float-ball.

  • Filler is driven through gears inside the machine frame.


ROPP aluminum cap capper

05-01 Glass Bottle Filler for Water1840

Aluminum cap capper is composed by gear device , capping device , anti rotate pole and elevated device .The drive is passed through transfer gear to the capper gear , and the elevated pole pass it to the capper.

The up and down movement is done by capping cam .The capping cam stays still, it rotates with the main equipment, and it rotates under the gear ring. Two screw roller and two ant burglary ring roller complete the capping under the capping self rotation. The cam is fixed on the top board .So the cam stands still, when it rotates, the roller on the sleeve rolls along the cam curve while the sleeve moves up and down.

When main shaft and gear rotate under the capping head, while two screw rollers and anti burglary roller complete capping under self rotation. If there is no cap, the safety piston will stop roller mesh. Adjust the nut can adjust the pressure.


Discharge Starwheel

05-01 Glass Bottle Filler for Water2740

  • Nylon starwheel and conveyor belt work together to discharge bottles.

  • Equipped with bottle jam protection device.


Discharge Conveyor

  • Driving motor is frequency inverted to synchronize with the filling line to prevent bottles from falling.

  • Discharge conveyor is equipped with photocell switch to slow down and stop filling line in case of fallen bottles.

Machine Frame

  • The machine frame is a welded structure of high quality carbon steel with the surface anti-rust treated and coated. The machine frame is wrapped with stainless steel sheet.

  • Driving system of the 3-in-1 Unit is positioned under the machine table. One main motor provides driving power via gear transmission.

  • The gear transmission system is an interleaved arrangement of steel gears and nylon gears.

  • The output shaft of the main motor is equipped overload protection to secure machine safety.


Electrical control system

The electrical cabinet is made of plated carbon steel. From bottle infeed to bottle discharge, a PLC controls the fully automatic operation of the 3-in-1 Unit.


Main Configuration

  • Material of filling valve: Stainless steel 304L

  • Material of rotary tray and machine platform of rinser and filler: Stainless steel 304

  • Main motor: ABB

  • Sliding bearing: Igus

  • Frequency inverter: Mitsubishi

  • Touch screen: Pro-face or Mitsubishi

  • PLC: Mitsubishi

  • Pneumatic components: Airtac

  • Photocell switch: Banner

  • Proximity switch: Turck


Previous: 
Next: 
+8613921964455
No. 1, Dongli Road, Donglai, Zhangjiagang, Jiangsu 215600, China
 © 2018 Sunswell Machinery  All rights reserved.  Site Map   Designed by iwonder.cn  ICP备案号:苏ICP备2022013671号