The Role of Palletizers in Streamlined Packaging

Views: 1683 Author: Howie SUN Publish Time: Update Time:
Shrink, carton and tray differ in cost per case and in what the pack has to survive, and the market decides before the machine does.
Key facts at a glance
TypesShrink wrap, wrap-around carton, carton packing, tray
RateMatched to the filler; usually the line bottleneck
Key controlFilm tension, seal temperature, case squareness
Wetted partsPE film, corrugated board, tray board
Key decisionShrink, carton or tray
Line positionAfter labelling, before palletizing

Shrink, carton or tray: which one fits the market?

Shrink wrap is the cheapest per case and the fastest, and it suits retail where the pack is the display unit. A wrap-around carton gives print area and stack strength for distribution. A tray with shrink is a compromise used where the pack needs both protection and visibility.

Why is the packer usually the line bottleneck?

A filler is rated on bottles per hour at a steady state; a packer is rated on cases per hour including film roll changes, seal cooling and pattern changes. Buyers compare the filler rating and forget that a packer rated below it sets the line rating for the whole shift.

Pack formatCost per caseWhat it protects
Shrink wrapLowestRetail display, short distribution
Tray + shrinkMiddleStacking and visibility
Wrap-around cartonHigherPrint area and long distribution
Regular slotted cartonHighest board useFragile packs and export

Site requirements, air and power consumption sit with the Wrap-round Film Shrink Wrapping.

How is a packer matched to the filler?

In cases per hour, at the same format, with margin for film changes and seal cooling. A packer rated below the filler sets the line rating, and the shortfall appears as bottles accumulating before the packer rather than as a machine fault.

Throughput and change-part lists are on the Carton Packing page rather than in this note.

What is the cost of a wrong case pattern?

It reaches the pallet, the film width and the truck. A pattern that does not fit the pallet footprint wastes cube, and a pattern that does not match the retail unit costs the customer a repack. Pattern is a commercial decision as much as an engineering one.

The same question is worked through from another angle in How Palletizers Streamline Beverage Packaging.

How to read the numbers. The numbers in the tables are reference ranges taken from the product specification. Film or carton changeover and downstream stops sit outside a rated rate, so plan on 0.65-0.85.

Frequently asked questions

How many cases per hour is 24,000 BPH?

At 24 bottles per case, 1,000 cases per hour. The packer, the palletizer and the label supply all have to carry that number, and the line rating is the lowest of them.

What film thickness should a shrink pack use?

It follows the pack weight and the transport distance, and it is set with the film supplier. A thinner film saves cost per pack and fails earlier in a long distribution chain.

How many packs per minute does a shrink packer run?

It is rated in packs or cases per hour and must exceed the filler output in cases. The limiting factor is normally the tunnel dwell time, not the wrapping speed.

Why does the film sag after the tunnel?

Too much heat, too little tension, or a film that is too thin for the pack weight. A pack that sags after cooling was sealed outside its window.

Key takeaways
  1. The packer sets the line rating more often than the filler does.
  2. Shrink quality is film tension and seal temperature, and failures appear in transit.
  3. Carton buys print and stack strength; shrink buys cost per case.
  4. Tunnel dwell time usually limits the packer, not the wrapper.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.