Key Advantages of Combibloc Fillers for Edible Oil

Views: 1675 Author: Howie SUN Publish Time: Update Time:
Edible oil is sold by weight, so it has to be filled by weight: a fixed volume delivers a different mass as the product temperature moves through the day. Combibloc Fillers are specifically designed to tackle the challenges posed by high viscosity fluids, ensuring a smooth and consistent filling process.
Key facts at a glance
Filling systemLoad cell net-weight, or piston dosing
Capacity range12,000-36,000 BPH at 0.2-2 L
ViscosityUp to 10,000 cP
AccuracyPlus or minus 0.5 g per bottle
Bottle or canPET or glass
Key controlWeight per bottle, temperature, drip-free cut-off

Why does edible oil need weight filling instead of volume filling?

Oil density changes with temperature, so a fixed volume delivers a different mass in the morning and in the afternoon. A load cell weighs what goes into the bottle and stops at the target mass. That is why an oil line is specified in grams and a water line in millilitres.

How does viscosity change the line design?

Above a few thousand cP the product moves by pressure and time rather than by gravity, so the bowl, the feed pipe and the valve bore all grow. Temperature control also becomes part of the filling specification, because a cold oil at 10 C and the same oil at 25 C behave like two different products.

Combibloc Fillers are specifically designed to tackle the challenges posed by high viscosity fluids, ensuring a smooth and consistent filling process.

Dosing methodAccuracy basisWhen it fits
Load cellNet weight per bottleDensity moves with temperature
PistonDisplacement volumeStable density, high speed, thick product
Volumetric valveChamber volumeLow-viscosity oil at steady temperature
Flow meterMeasured volumeContinuous flow, limited pulp or solids

Rated output, change parts and services are listed on the Edible Oil Load Cell page.

What is the acceptance test for an oil filler?

Weigh a fixed sample at the start, middle and end of a shift, on the same scale, and record the temperature at the same time. A filler that holds plus or minus 0.5 g at a steady 25 C may drift at 18 C. Acceptance without a temperature record is an argument waiting to happen.

The Filling Machine for Viscous Product is the matching unit when this becomes a line project.

When is a piston filler better than a load cell?

A piston filler doses by displacement and is faster and simpler for thick products with a stable density. A load cell is better when the product density moves, when the bottle weight varies, or when the legal fill is defined by net content. For high-value oil in variable PET, weight wins.

The same question is worked through from another angle in A Complete Guide to Selecting the Best Edible Oil.

How to read the numbers. The BPH figures quoted are reference ranges on the product specification. Changeover, CIP and temperature drift sit outside a rated BPH. Plan on 0.65-0.85 and check the pump curve at the lowest product temperature.

Frequently asked questions

Why does oil foam or bubble during filling?

Usually air entrained in the product or a fill that starts too fast. Letting the product settle in the bowl and ramping the valve opening removes most of it without changing the pump.

Does edible oil need nitrogen?

Some packers dose nitrogen into the headspace to slow oxidation, especially for polyunsaturated oils. It is an option, and its value depends on the oil and the target shelf life, not on the filler.

Can a load cell filler handle 5 L oil bottles?

Yes, with a longer fill time per valve. Above 2 L the practical rate per valve drops, so a 5 L line is normally specified for that format rather than shared with 1 L.

How is an oil line cleaned between products?

With a flushing cycle sized for the oil and the pipe run. High-viscosity oil needs a warm flush and a longer drain time than water, and the changeover belongs in the production plan.

Key takeaways
  1. Oil is sold by weight, so it is filled by weight.
  2. Density drift with temperature is the reason volumetric filling fails on oil.
  3. Weight, not volume, is the legal fill for oil.
  4. A temperature record turns an accuracy argument into a measurement.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.