How to Optimize Conveyor Layout for Filling Lines

Views: 2415 Author: Howie SUN Publish Time: Update Time:
Palletizing payback follows shift pattern and pattern stability, not the price of the robot.
Key facts at a glance
Supply scopeAir conveyor, roller conveyor, depalletizer, palletizer
FunctionMove bottles and cases without damage, stack outbound pallets
Key controlAccumulation pressure, guide rail gap, pattern repeatability
TypesSemi-automatic and automatic palletizing
Key decisionManual, semi-automatic or robotic palletizing
AutomationManual, semi-automatic or robotic

When does automatic palletizing pay back?

Automatic palletizing pays when the labour it replaces is continuous and the pattern is stable. A plant running two shifts at high case rates reaches payback faster than a single-shift plant with mixed patterns, because a robot needs the pattern defined before it can be programmed.

How much accumulation does a line need?

Enough to cover the longest normal stop downstream without stopping the filler, and no more. Extra accumulation hides a problem instead of solving it, and it adds floor space plus a place for bottles to sit and collect dust. The buffer size is a calculation, not a default.

FunctionManualAutomatic
Depalletizing empty bottlesRack or hand stackLayer depalletizer
Case palletizingOperator with pattern sheetLayer or robotic palletizer
Pallet wrappingHand wrapperIn-line stretch wrapper
AccumulationNone, line stops togetherBuffer sized to longest stop

The unit behind this configuration is the Conveying.

What does a palletizer need from the building?

Floor loading for a full pallet stack, clear height for the mast or robot envelope, and a pallet dispenser within reach of the operator. These are building decisions taken before the machine is ordered, and changing them later costs more than the palletizer.

Site requirements, air and power consumption sit with the Depalletizing & Palletizing.

What does a depalletizer need from the bottle supplier?

Square pallets, consistent layer sheets and a stable stack. Empty bottles are light, so a leaning pallet becomes a fallen layer at the depalletizer. The machine can only work with the stack it is given.

The same question is worked through from another angle in How to Maintain Conveyor Systems for High-Speed Lines.

How to read the numbers. Capacity figures come from the specification range, and the range is wide by design. A rated pallet rate assumes one pattern and one layer; changeover sits outside it, so size on 0.65-0.85 of line speed.

Frequently asked questions

How many cases per hour can a palletizer handle?

It is rated in cases or layers per hour and must exceed the packer output with margin. The number to compare is the pattern-adjusted rate, not the headline figure at one layer size.

Why do bottles jam at conveyor transfers?

Guide rail gap and transfer plate height. Both are set for one bottle diameter and both drift when a second format is introduced. Re-set them at every changeover, not once at installation.

Is a robotic palletizer better than a layer palletizer?

A robot is more flexible across patterns and gentler on the pack; a layer palletizer is faster for a single stable pattern. The choice follows the pattern mix, not the technology.

When is a semi-automatic palletizer the right choice?

When the pattern is stable and the labour is available at the end of the line. It costs less and runs slower, and it needs an operator for every layer change.

Key takeaways
  1. The conveyor touches every bottle, so it decides the real uptime.
  2. Accumulation should cover a normal stop, not hide a chronic one.
  3. Guide rail gap is a per-format setting, not an installation setting.
  4. Empty-bottle layers punish a badly squared pallet.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.