How Palletizers Improve Packaging in High-Speed Lines

Views: 1732 Author: Howie SUN Publish Time: Update Time:
The packer sets the line rating more often than the filler does, because it is rated in cases per hour including film changes and seal cooling.
Key facts at a glance
TypesShrink wrap, wrap-around carton, carton packing, tray
SpeedMatched to the filler; usually the line bottleneck
Key controlFilm tension, seal temperature, case squareness
MaterialPE film, corrugated board, tray board
Key decisionShrink, carton or tray
Line positionAfter labelling, before palletizing

Shrink, carton or tray: which one fits the market?

Shrink wrap is the cheapest per case and the fastest, and it suits retail where the pack is the display unit. A wrap-around carton gives print area and stack strength for distribution. A tray with shrink is a compromise used where the pack needs both protection and visibility.

Why is the packer usually the line bottleneck?

A filler is rated on bottles per hour at a steady state; a packer is rated on cases per hour including film roll changes, seal cooling and pattern changes. Buyers compare the filler rating and forget that a packer rated below it sets the line rating for the whole shift.

Pack formatCost per caseWhat it protects
Shrink wrapLowestRetail display, short distribution
Tray + shrinkMiddleStacking and visibility
Wrap-around cartonHigherPrint area and long distribution
Regular slotted cartonHighest board useFragile packs and export

Site requirements, air and power consumption sit with the Wrap-round Film Shrink Wrapping.

How is a packer matched to the filler?

In cases per hour, at the same format, with margin for film changes and seal cooling. A packer rated below the filler sets the line rating, and the shortfall appears as bottles accumulating before the packer rather than as a machine fault.

Site requirements, air and power consumption sit with the Carton Packing.

What is the cost of a wrong case pattern?

It reaches the pallet, the film width and the truck. A pattern that does not fit the pallet footprint wastes cube, and a pattern that does not match the retail unit costs the customer a repack. Pattern is a commercial decision as much as an engineering one.

The same question is worked through from another angle in The Role of Palletizers in Streamlined Packaging.

How to read the numbers. Rated capacity in this note follows the product specification range, not a factory acceptance test. Packers are rated on a steady pack; jams and changeover sit outside that figure. Plan on 0.65-0.85.

Frequently asked questions

How many cases per hour is 24,000 BPH?

At 24 bottles per case, 1,000 cases per hour. The packer, the palletizer and the label supply all have to carry that number, and the line rating is the lowest of them.

Can a packer run 6-packs and 24-packs?

With different lane guides and a film width change, yes. The changeover is mechanical on a semi-automatic packer, so a plant selling both formats usually accepts a scheduled stop between runs.

How many packs per minute does a shrink packer run?

It is rated in packs or cases per hour and must exceed the filler output in cases. The limiting factor is normally the tunnel dwell time, not the wrapping speed.

What case pattern should a new line use?

The pattern that fits the pallet footprint and the retail unit. It is decided with the palletizer and the film width at the same time, because changing it later changes three machines.

Key takeaways
  1. The packer sets the line rating more often than the filler does.
  2. Case pattern is a specification item, not a changeover detail.
  3. Carton buys print and stack strength; shrink buys cost per case.
  4. Case pattern is decided with the pallet, not after it.
About the author
Written by the Sunswell engineering team - led by Howie SUN, Founder & CEO, with 14 years in filling and blow-moulding equipment R&D and turnkey project delivery across 71+ countries.
Last reviewed: 2026-08-28 . Reviewed by Sunswell engineering team
×

Contact Us

captcha

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.

×

Inquire

*Name
*Email
Company Name
Phone/Whatsap
*Message

*We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.