Sunswell has cultivated the Kazakhstan market for many years. Among them, many large production line projects have been made, and it has a certain brand influence in the local area. Therefore, more and more customers find Sunswell to seek cooperation, including some new entrants.
This equipment is used in two piece aluminum can and PET Bottle to strength aluminum cans & bottles.Features:- No can, no dosing, reduce the waste of nitrogen. With detector to adjust the speed.- Vacuum isolate protect to reduce the running cost.- Nozzle protecting device, avoid ice phenomenon.- Liq
It is used for filling beer or beverages (such as soda, beer, etc.) containing CO2 gas in cans. The filling valve adopts float ball measuring cylinder type electronic pneumatic valve, which is also the most advanced technology in the world for aluminum can carbonated filling. It adopts float ball me
“ZBN Vizit” LLP is a typical carbonated soft drink bottler located in Shymkent, the biggest city of South Kazakhstan.
Treatment for drinking water production involves the removal of contaminants and/or inactivation of any potentially harmful microbes from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. In general terms, the
It has been more than 2,600 years since the phenomenon of electrostatic attraction was discovered, and the basic electrostatic theory has become the theoretical basis of modern electrostatic dust removal technology, less than a hundred years ago. In recent decades, due to economic development and
Turkey is a country spanning the two continents of Asia and Europe, bordering the Black Sea to the north, the Mediterranean Sea to the south, Syria and Iraq to the southeast, the Aegean Sea to the west, Greece and Bulgaria to the east, and Georgia, Armenia, Azerbaijan and Iran to the east. . Turkey'
Recently, we received a new order which is for liquid detergent filling and packaging use. This line includes bottle buffering & feeding table, high precise linear servo control filling machine, linear cap screwing machine, cap elevator, inkjet dater printer, double sides labeling machine, automatic
Three years ago, a customer from New York, USA purchased a 1500BPH (1gallon) water filling line from Sunswell, including automatic blow molding machine, three-in-one filling machine, labeling machine, conveying system, air compressor and other auxiliary equipment.
Our mixer is an advanced online automatic mass flow mixer, can automatically detect and accurately adjust, it reduce precision error from traditional manual deployment and save the deployment system cost, especially for high speed continuous production line, and can be combined with the associated e
After more than half a year of production racing against the epidemic, we finally completed and shipped at the beginning of July. Very thanks for client’s understanding and patient waiting. This order includes 21000BPH 370ml carbonated filling machine and 1T/hr CIP. Real pictures as below for refere
Tray Packer suit for beverage, drinking water,beer wine and infusion bottle ect. packaging,which can be packed without tray and with a firm and beautiful appearance.
Semi-fluid refers to the fluid material with the viscosity range of 1000-10000mPa ·s. When filling this kind of the material, often because of the filling valve diameter selection is not reasonable and the situation of leakage, which not only affects the filling accuracy, but also cause pollution.
Two years ago, Angolan customer Berosil Industrial ordered a bottled water production line from Sunswell, including injection molding, bottle blowing machine, filling machine, conveyor, sleeve labeling machine and film packing machine, as well as related auxiliary equipment.
In our daily life, whether we go out to eat or eat at home, whether it is winter or summer, we generally drink some beer, and beer has now become a part of our lives. So, naturally, there are more and more beer production lines. Now let's see how beer is produced! The raw materials for beer producti
Since 2022, the global Covid-19 situation is still seriously, and the Internatonal trade environment is still not good ! Domestically, Shanghai, Jiangsu and other places were blocked, so the ports and terminals were unable to deliver goods. After three months, finally at the end of May, our three Wa
Semi-fluid refers to the fluid material with the viscosity range of 1000-10000mPa ·s. When filling this kind of the material, often because of the filling valve diameter selection is not reasonable and the situation of leakage, which not only affects the filling accuracy, but also cause pollution.
We just finish manufacturing one set of full automatic single loop CIP system which has 3 pcs 2000L tanks and 18m3 CIP feeding pump, 20m3 CIP return pump.Now this machine already be packed and ready for loading into container. We believe that this machine will serve customer in the best state and lo
Since the end of March, the new crown virus of Omicron has swept Shanghai, and Shanghai has begun to close the city. It has also seriously affected the normal production and life of cities around Shanghai. Everything slows down. Logistics was blocked, raw materials could not come in, products could
Depalletizer workflow and principlesHydraulic car put the whole stack bottles into unstacking station (hydraulic lift table)Nursing bottle cylinder starts, cover entire stack bottles from three sides.Hydraulic lifts start, hold the board rise to a certain height crib.Folder separator cylinder starts
We can produce pure water ,mineral water, drinking water, soda water, flavored water , natural water ,spring water ,potable
water, flavoured water. Depending on the different packages, we can divide it into two categories: bottled mineral water line(200ml-2000ml) and barreled mineral water line (1- 5 gallon water line).
Equipment structure:1. Rinsing system: Combined with rotary tray with clamp, water distributing tray, water tank and rinsing pump. 2. Filling system: Combined with hydraulic, filling valve, controlling ring, and elevator-cylinder. 3. Capping system: Combined with capper, cap sorter and cap falling track. 4. Driving system: Combined with main motor and gears. 5. Bottle transmitting system: Combined with air conveyor, steel starwheels and neck supporting carrier plates. 6. Electrical controlling system: this part is frequency inverted, PLC controlled and touch screen operated.
Model | CGF12125 | CGF18186 | CGF24248 | CGF323210 | CGF404012 | CGF505012 |
washing, filling and capping heads | 12-12-5 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-12 |
Production capacity(600ml) (B/H) | 2000-4000 | 5000-7000 | 8000-12000 | 12000-15000 | 16000-20000 | 20000-24000 |
Motor power(kw) | 2.2kw | 2.2kw | 3kw | 5.5kw | 7.5kw | 11kw |
Weight (kg) | 2500 | 3500 | 4500 | 6500 | 8500 | 9800 |
> the wide range of liquid packaging plant machinery
> the various range of possible end products
> 10+ years of global market experience
> 80+ countries of customers worldwide
> 20+ mechanical, electrical and food science engineers
> 10+ service staff
We can produce pure water ,mineral water, drinking water, soda water, flavored water , natural water ,spring water ,potable
water, flavoured water. Depending on the different packages, we can divide it into two categories: bottled mineral water line(200ml-2000ml) and barreled mineral water line (1- 5 gallon water line).
Equipment structure:1. Rinsing system: Combined with rotary tray with clamp, water distributing tray, water tank and rinsing pump. 2. Filling system: Combined with hydraulic, filling valve, controlling ring, and elevator-cylinder. 3. Capping system: Combined with capper, cap sorter and cap falling track. 4. Driving system: Combined with main motor and gears. 5. Bottle transmitting system: Combined with air conveyor, steel starwheels and neck supporting carrier plates. 6. Electrical controlling system: this part is frequency inverted, PLC controlled and touch screen operated.
Model | CGF12125 | CGF18186 | CGF24248 | CGF323210 | CGF404012 | CGF505012 |
washing, filling and capping heads | 12-12-5 | 18-18-6 | 24-24-8 | 32-32-10 | 40-40-12 | 50-50-12 |
Production capacity(600ml) (B/H) | 2000-4000 | 5000-7000 | 8000-12000 | 12000-15000 | 16000-20000 | 20000-24000 |
Motor power(kw) | 2.2kw | 2.2kw | 3kw | 5.5kw | 7.5kw | 11kw |
Weight (kg) | 2500 | 3500 | 4500 | 6500 | 8500 | 9800 |
> the wide range of liquid packaging plant machinery
> the various range of possible end products
> 10+ years of global market experience
> 80+ countries of customers worldwide
> 20+ mechanical, electrical and food science engineers
> 10+ service staff