Glass bottle water filling for glass bottle integrates the function of rinsing, filling and capping together. Based on advanced technology overseas, and designed according to room filling processing demands of non-carbonated water and alcoholic drinks to be one of the advanced room filling production line.
1.Washing parts:
<1>The type of Into bottle is Stainless Steel conveyor belt ,bottle screw shaft connection with Bottle dial . <2>All 304/316 stainless steel rinse heads with rubber holding parts, water spray style inject design, more save water consumption and more clean . <3>304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
2.Filling parts:
Adopting the way of filling by lifting the bottom of the bottle, plus the function of pre-cover of the centralizing cover with high precise centralization,which ensure the right seating of mouth of the bottle and filling valve,with low liquid loss.
3.Capping parts:
1> pulling and capping system, Porcelain capping parts, to protect metal crown cap , make sure minimum bottle crash during capping
<2> All 304/316 stainless steel construction
<3> No bottle no capping
<4> Automatic stop when lack of bottle
<5>Capping effect is stable and reliable ,Defective rate ≤0.2% .
| | | | | | | | | |
| Capacity (BPH/500ml) | 5,000 | 7,000 | 10,000 | 15,000 | 18,000 | 21,000 | 24,000 | 30,000 |
The bottle enters into the filling part of 3-in-1 machine through screw by convey chain. The filling valve acted by the cam can realize up and down. the filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the capping part through hold neck transition poking wheel. The guard plate holds bottle upright not rotating. The screw capping headkeeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, discharging through the action of the cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel.
Main configuration:
1) Material of filling valve: Stainless steel SUS304.
2) Material of rotary tray and machine platform of rinser and filler: Stainless steel SUS304.
3) Main motor: ABB/SEW/SIEMENS.
4) Sliding bearing: Igus.
5) Frequency inverter: Mitsubishi.
6) Touch screen: PROFACE.
7) PLC: Siemens/Mitsubishi.
8) Pneumatic components: FESTO/AIRTAC.
9) Seals: Busak+Shamban.
10) Photocell switch and proximity switch: TURCK
Filling technology: Long neck beer filling valve / Short neck beer filling vale
Capping method:
Crown capper / Ropp capper
Sunswell glass bottles are designed to be sealed exactly – with a metal pry off cap, a Roll On Pilfer Proof (ROPP) cap, or a standard (non pilfer proof) twist top cap. Our bottles can also be corked, and a swing top cap option is also available, as is a child resistant cap for customers with this requirement.
About Sunswell:
Set up in 2008, Sunswell leads the market in the field of liquid bottling, blow molding, labeling, packaging machinery and process technology for water, tea, juice, carbonated drinks, energy drinks, liquid, beer, edible oil, dairy and daily care products, etc.
Advantage：
(1)A to Z turnkey plant provider (2)Fully automatic or economic solution optional (3)10+ years of global market experience (4)Serve customers over 50 countries and regions worldwide
