You are here: Home » Products » Accessories » X-ray Liquid Test for Can Packaging Juice And Carbonated Drinks
Share to:

X-ray Liquid Test for Can Packaging Juice And Carbonated Drinks

Filling level detector is developed to meet international advanced level liquid level detection requirements. Use of low-energy X-ray after the interaction with the tested substances, materials-ray intensity with the test material surface changes the position of principle, to control the detection of liquid filling material capacity.

Quantity:
  • SSW-XL
  • Sunswell
  • 9026100000

Filling level detector is developed to meet international advanced level liquid level detection requirements. Use of low-energy X-ray after the interaction with the tested substances, materials-ray intensity with the test material surface changes the position of principle, to control the detection of liquid filling material capacity. Because of its non-contact measurement, a fundamental solution to the conventional weighing method cannot measure the liquid filling material on the production line capacity problems. It is widely used in food, pharmaceutical, chemical and other filling (either bottled or canned) liquid-line automatic control of the pipeline material. For ensuring product quality, increase economic efficiency and social significance.

 

Features

 

l  Non-contact detection, speed and accuracy. Whether bottled, canned and other production lines could be detected on the surface of the filling.

l  In line with a variable speed transmission state, free from transmission with rate stability limit.

l  Stainless steel housing, sealed design and manufacture of the host, steam fog, water droplets, and environmental adaptability.

l  Relative measurement method using free samples, free from temperature measurement resolution, long-term drift effects.

l  Single-chip computer, the instrument anti-interference ability, high reliability.

l  Sound, light alarm, and automatically remove the containers failed.

l  Instrument set up inspection procedures and debugger, with the ability to automatically check for faults.

l  Big touch screen display, LED backlit LCD, writing clear, bright, man-machine dialogue operation.

l  Contain radioactive isotopes, radiation protection safe and reliable.

 

Technical Parameters

 

l  Production line conveyor speed: 1.5m / s.

l  Container diameter: 40mm ~ 120mm.

l  Dynamic container Resolution: ± 1mm, or ± 3.2ml for 206 aluminum cans, conveyor speed 0.5m/s).

l  ± 1.5mm, or ± 4.8ml (for 206 aluminum cans, conveyor speed 1.5m/s).

l  Static container Resolution: ± 0.5mm, or ± 1.6ml (for 206 aluminum cans, conveyor speed 0.5m/s).

l  ± 1mm, or ± 3.2ml (for 206 aluminum cans, conveyor speed 1.5m/s).

l  Removed container failure rate: 98% (test speed 1200 pcs / min).

l  Use conditions: ambient temperature: 0 ~ 40 °C, Relative humidity: 95% (40 °C), power supply: 220V ± 20V, 50Hz. temperature error: 0-40°C range from temperature changes.

l  Machine Size: 620mm × 165mm × 400mm (length × width × height)

l  Weight: 40kg.

l  Power consumption: 150W.

 


+8613921964455
No. 1, Dongli Road, Donglai, Zhangjiagang, Jiangsu 215600, China
© 2018 Sunswell Machinery  All rights reserved.  Site Map   Designed by iwonder.cn