Blowing-Filling-Capping Combiblock means without bottle rinsing. After blowing, the bottles will be fed directly into filling machine, thus saving energy, factory space and water consumption.
Sunswell Blowing Filling Capping Combiblock Volumetric Filling for Bottled Water 30,000BPH
3-in-1 combiblock, composed of blowing, volumetric filling and capping. It is innovated and designed in the requirement of still pure water and mineral water. The combiblock avoids friction of bottles during air conveying, beneficial for light weight bottles.
Capacity: 12,000 – 40,000BPH (500ml)
Rotary Blow Molding Machine
1) Horizontal heating chain drive system
lUse high-strength brass processing to extend the service life
lLarge caliber cooling mouth, to ensure that the preform neck not heated, with effective protection of preform thread
2) Efficient energy-saving preform heating system
lAdjustment device with ruler instructions, equipment adjustment more convenient
lUsing streamlined guide plate, so that the air flow more effectively on the preform neck cooling and protection
lMirror reflector, high reflection, more energy efficient
lNorgren’s smaller high pressure valve group, less dead space
lSaving blowing air
3) Patented blowing nozzle unit for stable preform
lPositioning first, sealing after, to ensure that the preform vertical blowing, more stable.
lTo avoid broken bottle blocking machine phenomenon.
4) Fast mold changing unit (6-screw design)
l6-screw mold change design
l6-8min for each mold changing
5) H-type steel frame, reducing vibration, more stable
lDriving platen and the host frame as a whole processing, more accurate to feed preforms.
Ensure without vibration at 2000BPH each cavity.
lH-type steel welding, high-speed rotation more stable.
6) High accurate filtration system and High pressure air recycling system
lHigh-pressure air recovery system can save 30% of air, in addition, the extra gas leads to other machines.
lHigh-pressure filtration system accuracy of 0.001ppmw, greatly extend the service life of pneumatic components.
7) High speed & energy saving blowing system
lIntegrated brake system with slewing ring, more reliable and stable.
8) Reliable electrical control
lThrough the teleservice remote monitoring system, real-time recording of any operation of the field device or shutdown information, through the analysis of software real-time analysis of equipment operating status.
lSafety relay equipped
lSafety door locking
9) Air conditioning and Anti-condensation System on electrical cabinet
10) Ion air blowing
lIon gas blowing for removing dust on preform
lPositive and negative ion generator neutralize static electricity on surface of preform
lBlow clean compressed air onto the surface of the preform
lVacuum dust suction
Gravity Filling Machine
a) Filling valves and tank are made of stainless steel SUS304.
b) Large flat bearing with teeth, stable and reliable performance.
c) Volumetric filling by mass flowmeter.
d) Ring shape tank with float ball level control.
e) High speed and high accuracy filling valve with 200ml/s flowing speed
f) Filling valve equips dummy cup and can do CIP circularly.
g) With rotary spray ball in tank to ensure cleaning effect.
h) Lift by pneumatic cylinders.
a) Magnetic constant torque capping head ensures stability and controls defective rate of capping less than 0.2%.
b) Cap dropping rail equips a group of photoelectrical switch for reverse cap detecting.
When lack of cap, machine will be stopped automatically.
c) Bottle infeed detecting switch works with the pneumatic cylinder on cap starwheel to avoid feeding cap on no-bottle
Rotary blow molder
Bottle infeed and outfeed system