You are here: Home » Solution » Soft Drink Filling » Blowing-Filling-Capping Combi for CSD Cola Drink Packaged by PET Bottles
Share to:

Blowing-Filling-Capping Combi for CSD Cola Drink Packaged by PET Bottles

Blowing-Filling-Capping Combiblock means without bottle rinsing. After blowing, the bottles will be fed directly into filling machine, thus saving energy, factory space and water consumption.

Quantity:
  • SSW-CB
  • Sunswell
  • 8422301090

Combiblock – Blowing, Filling & Capping

For carbonated drinks by gravity filling


146666911645696408


 3-in-1 combiblock, composed of blowing, CSD gravity filling and capping. It is innovated and designed in the requirement of

carbonated soft drinks and carbonated water. The combiblock avoids friction of bottles during air conveying.


Capacity: 12,000 – 30,000BPH (500ml)


Features

Rotary Blow Molding Machine

1)    Horizontal heating chain drive system

 

620490750967489787


      lUse high-strength brass processing to extend the service life

lLarge caliber cooling mouth, to ensure that the preform neck not heated, with effective protection of preform thread

 

2)    Efficient energy-saving preform heating system

                         

292156211057771881


lAdjustment device with ruler instructions, equipment adjustment more convenient

  

160773635136531708

 

lUsing streamlined guide plate, so that the air flow more effectively on the preform neck cooling and protection

lMirror reflector, high reflection, more energy efficient

                           

237924689200908136


lNorgren’s smaller high pressure valve group, less dead space

lSaving blowing air

 

3)    Patented blowing nozzle unit for stable preform 

                         

4


lPositioning first, sealing after, to ensure that the preform vertical blowing, more stable.

lTo avoid broken bottle blocking machine phenomenon.

 

4)    Fast mold changing unit (6-screw design)

                  

5

 

l6-screw mold change design

l6-8min for each mold changing

 

5)    H-type steel frame, reducing vibration, more stable

                 

6

 

lDriving platen and the host frame as a whole processing, more accurate to feed preforms. 

   Ensure without vibration at 2000BPH each cavity.

lH-type steel welding, high-speed rotation more stable.

 

6)    High accurate filtration system and High pressure air recycling system

 

                                   7173984909816716776

 

lHigh-pressure air recovery system can save 30% of air, in addition, the extra gas leads to other machines.

                     

470983334330257275

 

lHigh-pressure filtration system accuracy of 0.001ppmw, greatly extend the service life of pneumatic components.

 

7)    High speed & energy saving blowing system

                       

612756002546405210


lIntegrated brake system with slewing ring, more reliable and stable.

 

8)    Reliable electrical control

                     

140641484895164143

 

lThrough the teleservice remote monitoring system, real-time recording of any operation of the field device or shutdown information, through the analysis of software real-time analysis of equipment operating status.

 

lSafety relay equipped


308744789787292797

 

lSafety door locking

 

9)    Air conditioning and Anti-condensation System on electrical cabinet

 

590354825382702932

 

10)  Ion air blowing

 

 879210315846410307

 

lIon gas blowing for removing dust on preform

lPositive and negative ion generator neutralize static electricity on surface of preform

lBlow clean compressed air onto the surface of the preform

lVacuum dust suction

 

10098721785141536

 

CSD Gravity Filling Machine

 

34118848791741477

 

lRotary wheel fully made of stainless steel SUS 304.

lIsobaric filling method.

lFilling valves are made of SUS 304

lFilling valves are reasonably structured with accurate filling.

lBottles go up and down by pneumatic cylinders and cams, to process filling with contact to bottle-mouth.

lLevel of cylinder is controlled with float-ball.

lFiller is driven through gears inside the machine frame.

lLink-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.

 

Capper

 

717961800457030248

 

Capper is the machine with highest precision, influence very much with the stability and reliability of the filling monoblock. Our capper features as follows:

lThe equipment is designed with the support of experts from school of engineering and mechanical in Shanghai Jiao Tong University, and uses the technology of Arol from Italy, most advance technology in the world, developed with the experience of asepsis filling machine. For example, I) extruding wheel (main part to control the stability when sealing), uses the latest technology. Kinematical and kinetic design of the wheel by experts improves the stability and credibility of the equipment. II) Sealing faucet (main part to control the credibility of sealing), is improved by experts with the design of alnico. Besides the magnetic contortion variation device, there is variation dial which makes variation more easily. The benefit of this design is not only it can set the contortion, but also it makes contortion more precise and credible, and reduces inferior.

lCap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.

lCap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.

lThe capper is equipped with inlet bottle detection switch.

lCentrifugal way of cap arranging is adopted to reduce damage of caps.

lA cap inspecting system is applied to control on-off of elevator.

 

Equipment Structure

 

  • Stand

  • Rotary blow molder

  • Rotary filler

  • Rotary capper

  • Bottle infeed and outfeed system

  • Control

 


+8613921964455
No. 1, Dongli Road, Donglai, Zhangjiagang, Jiangsu 215600, China
© 2018 Sunswell Machinery  All rights reserved.  Site Map   Designed by iwonder.cn